Payment & Shipping Terms:
UCP210-30has a combination of a cast iron pillow block housing with an anti-rotation device with self-alignment and a set screw locking chrome steel insert bearing with a slinger seal design. This specific unit is a standard duty pillow block bearing with a wide inner ring and two set screws and a cast iron unit with the standard base to center height with a grease fitting.
UCP200 Series Pillow Block Bearingis equipped with two specifically designed set screws that are positioned in the inner ring of the ball bearing to lock and attach to the shaft.
Common usage forUCP200SeriesPillow Block Bearing include: Agriculture, Automotive, Construction, Pump, Manufacturing Equipment, Sporting and Consumer Goods, Conveyor and Fan Assemblies, Farm Machinery, HVAC, Feed Mill, Economical housed bearing solution and many other Industrial Equipment.
|Bearing Type||Extended inner race with set screws|
|Dynamic Load Rating (Cr)||7,890|
|Static Load Rating (Cor)||5,223|
|Shaft Height (h)||2.2520|
|Housing Width (b)||2.3620|
|Mounting Hole Center-to-Center (e)||6.2600|
|Housing Length (a)||8.1100|
|Mounting Slot Length (S2)||0.8660|
|Mounting Slot Width (S1)||0.7870|
|Housing Base Thickness (g)||0.7480|
|Housing Height (w)||4.4490|
|Bearing Inner Race Width (Bi)||2.0310|
|Bearing Inner Race Width - Short Side (n)||0.7480|
|Bearing Inner Race Width - Extended Side (m)||1.2830|
|Mounting Bolt Size||0.6250|
|Bearing Number||UCP 210-30|
|Housing Number||P 210|
|Shaft Dia., Nominal (d)||1.8750|
|Shaft Size (ds)||1 7/8|
|Material||Cast iron housing, chrome steel bearing|